Guide · Office and email
How to import a .vcf file into Outlook, with all its contacts (classic Outlook, new Outlook, Outlook.com, Mac)
By Blink Brief · Updated · How pages are made
First open the .vcf file in the free VCF viewer to see how many contacts it holds: press Choose a .vcf file and the heading counts them. If it holds one contact, double-click the file and classic Outlook opens it in a contact window: click Save & Close. If it holds many, press Download for Outlook (.csv) in the viewer and import that CSV: Microsoft's own page says that on a PC a vCard file has to become a .csv first. Classic Outlook imports it with the Import and Export Wizard; new Outlook and Outlook.com with People › Import contacts.
Short answer
- Count first: VCF viewer › Choose a .vcf file. The file is read in this browser tab and never uploaded.
- One contact, classic Outlook: double-click the .vcf › Save & Close.
- Many contacts, classic Outlook: Download for Outlook (.csv) › File › Open & Export › Import/Export › Import from another program or file › Comma Separated Values.
- New Outlook: People › Import contacts › Browse › Import. Outlook.com: People › Manage contacts › Import contacts.
- Outlook for Mac: double-click the .vcf › Save & Close. Every contact in it is saved.
Check the file first: one contact or many
A .vcf file is a vCard: plain text, with one block from BEGIN:VCARD to END:VCARD for each contact. Microsoft says one vCard file “can contain one or many contacts”. Outlook takes the two cases by different routes, so the count decides what you do next.
- Open the VCF viewer and press Choose a .vcf file, or drop the file on the box on a computer.
- Read the heading: it gives the number of contacts, and the line under it the vCard version (2.1, 3.0 or 4.0).
- Look down the list for names, phones and emails. A contact with only a company is marked, and if a card has no END:VCARD line the line under the heading says the file may be cut off.
The file is read in this browser tab and never uploaded; close the tab and it's gone. The viewer shows the contacts and writes files. It doesn't add anything to Outlook: Outlook's own import does that, below.
Classic Outlook on Windows: one contact opens, many need a CSV
Classic Outlook is the Windows app with a File menu at the top left (Outlook for Microsoft 365, 2024, 2021, 2019, 2016). Microsoft's page “Import vCards to Outlook contacts” gives these steps for one card:
- A vCard attached to an Outlook email: right-click the vCard in the message, click Add to Outlook Contacts, then Save & Close in the contact window. Repeat for each vCard in the message.
- A .vcf saved on the PC, or attached in another mail program: open it. Microsoft: “If Outlook is installed on your computer, the vCard opens in an Outlook window since the .vcf file name extension is associated with Outlook.” Click Save & Close.
For a file of many contacts, Microsoft's page on iCloud exports is plain: “To import contacts in a vCard file to Outlook on a PC, you need to convert them from a .vcf file format to a .csv file format.” Its own conversion goes through Windows: in File Explorer, open your Contacts folder (C:\Users\<username>\Contacts), choose Import › vCard (VCF file), pick the file and choose OK for each contact, then Export › CSV file. With hundreds of contacts, that is one OK per contact. The next section makes the same CSV in one press.
The CSV for Outlook: Download for Outlook (.csv)
- In the VCF viewer, open the .vcf file.
- Press Download for Outlook (.csv). The file goes to your downloads, named after the .vcf, ending in -outlook.csv.
- In classic Outlook, choose File › Open & Export › Import/Export.
- Choose Import from another program or file › Next, then Comma Separated Values › Next.
- Browse to the CSV file and choose how to handle duplicates: Replace duplicates with items imported, Allow duplicates to be created (Microsoft's default) or Do not import duplicate items. Select Next.
- Select the Contacts folder of the account the contacts belong to, then Next › Finish. The import is done when the Import Progress box closes.
The file has one row per contact under the English column names of Microsoft's sample CSV: First Name, Last Name, Company, Job Title, Mobile Phone, Business Phone, Home Phone, E-mail Address, the home and business address parts, Birthday, Notes and Web Page. It is UTF-8, the encoding Microsoft recommends “for best results”, so accents and Japanese names stay as they are. Photos aren't in it: a CSV cell can't hold one.
Microsoft suggests a test run: import a file with a few contacts first, check them, delete them, then import the whole list.
New Outlook and Outlook.com
New Outlook for Windows, Outlook on the web and Outlook.com import contacts from a CSV file. Make it with Download for Outlook (.csv), as above, then follow Microsoft's steps for your Outlook.
New Outlook for Windows
- Select People in the navigation bar. If it isn't there, select More apps, then People.
- On the ribbon, select Import contacts.
- Select Browse, choose the CSV file, select Open, then Import.
Microsoft adds: “If the steps under this New Outlook tab don't work, you may not be using new Outlook for Windows yet.” Then use the classic Outlook steps.
Outlook on the web and Outlook.com
- Select People in the navigation bar.
- On the ribbon, select Manage contacts › Import contacts.
- Select Browse, choose the CSV file, select Open, then Import.
Microsoft warns that a file that isn't UTF-8 may show garbled names, and that the import then shows some example contacts so you can check them. The viewer's file is UTF-8.
Outlook for Mac
Outlook for Mac (Microsoft 365, 2024, 2021) takes a .vcf with many contacts by itself. Microsoft's steps:
- Double-click the .vcf attachment in the message, or the .vcf file saved on the Mac. If it doesn't open in Outlook, Control-click it, point to Open With and click Microsoft Outlook.
- The vCard opens in a Contacts window. On the Contact tab, click Save & Close.
Microsoft: “If the vCard has multiple contacts, only the first contact will appear in the window in Outlook. However, each contact in the vCard will be saved individually.” Seeing one name in the window is expected. The same page says Outlook for Mac “does not currently support bulk importing of multiple individual vCard files nor .csv files”, so the CSV route above is for Windows and the web. Several .vcf files of one contact each go in one at a time: double-click each.
Only one contact came in
- The viewer counts one contact. The file was exported with one. Microsoft's page on iCloud exports names this “the most common issue”: “you might export only one contact from iCloud when you intended to export all of them.” Export again with every contact selected; for an iPhone, export iPhone contacts has Apple's steps.
- The viewer counts many, and you double-clicked the file in classic Outlook. Microsoft's route for a file of many on a PC is the CSV: press Download for Outlook (.csv) and import it with the wizard.
- On a Mac, the window showed one name. Microsoft says the window shows the first contact and saves each one. Check your contacts list before importing again, or you'll make duplicates.
- The viewer says a contact has no END:VCARD line. The file may be cut off, so contacts after that point can be missing. Get the file again.
- Fewer came in through the CSV than the viewer counted. Look for contacts the viewer marks as duplicates, and for the duplicates choice you made in the wizard: Do not import duplicate items keeps Outlook's copy.
If an import fails in another way, Microsoft keeps a page called “Fix problems importing contacts to Outlook”, linked from its CSV import steps.
Outlook in another language: the column headings
Microsoft's page on CSV files for Outlook says: “The language of the column headings must match Outlook's default language. If Outlook's default language is set to Portuguese, for example, you must edit the column headings so they appear in Portuguese.” The page applies to classic Outlook, new Outlook for Windows and Outlook.com.
The viewer's Download for Outlook (.csv) writes English headings (First Name, Last Name, Mobile Phone and so on). In an Outlook set to English, import it as it is. In an Outlook set to another language:
- Open the CSV in Notepad, not Excel: an Excel set to a language that uses semicolons (German, French, Italian or Spanish, for example) puts each row in one cell and saves it with semicolons.
- Change the words in the first row to your Outlook's language. Keep the commas between them and every row under it as they are, and save with the encoding UTF-8.
- Import a few contacts first and check that each column landed in the right field.
To see the exact headings your Outlook uses, export your contacts to a CSV from that Outlook (Microsoft's same page gives the export steps: classic Outlook File › Open & Export › Import/Export › Export to a file; new Outlook People › Export contacts) and copy its first row. We haven't tried this in an Outlook set to another language: no Microsoft account or Outlook was signed in here, and none of the imports on this page were tested. The VCF viewer and its CSV were tested in Chromium and WebKit with our own sample files.
Going the other way, from a spreadsheet to a .vcf for a phone? Excel to VCF turns a contact list into one .vcf file. For a phone's import, import a .vcf file on an iPhone or Android has Apple's and Google's steps.
Questions
Why does Outlook import only one contact from my VCF file?
Count the contacts in the file first: open it in the free VCF viewer, whose heading gives the number. If it holds one, it was exported with one: Microsoft calls exporting a single contact from iCloud instead of all of them the most common issue. If it holds many, use Microsoft's route for a file of many on a PC: turn the .vcf into a .csv (Download for Outlook (.csv) in the viewer) and import that with the Import and Export Wizard.
Can Outlook import a VCF file with multiple contacts?
Outlook for Mac can: Microsoft says that when a vCard holds several contacts, only the first shows in the window, but each one is saved. For Outlook on a PC, Microsoft says you need to convert the .vcf file to a .csv file and import the CSV. New Outlook imports contacts from a CSV file through People › Import contacts, and Outlook.com through People › Manage contacts › Import contacts.
How do I convert a VCF to CSV for Outlook?
Open the .vcf in the free VCF viewer and press Download for Outlook (.csv). It writes one row per contact under the English column names of Microsoft's sample CSV, in UTF-8, in the browser tab, with no upload. Microsoft's own way on Windows goes through the Contacts folder in File Explorer: Import the vCard, then Export it as a CSV file.
Do I need Outlook in English to import the CSV?
Microsoft says the column headings must match Outlook's default language. The viewer's Outlook file has English headings, so in an Outlook set to another language, rename the headings in the first row to that language's words before you import.
Sources
- Microsoft: Import vCards to Outlook contacts: Outlook for Microsoft 365, 2024, 2021, 2019, 2016; Save & Close; a .csv goes through the Import and Export Wizard. Read on 10 November 2026.
- Microsoft: Import contacts from iCloud (vCard .vcf file) to Outlook: on a PC, a .vcf must become a .csv; exporting one contact instead of all is the most common issue. Read on 10 November 2026.
- Microsoft: Import or export contacts in Outlook using a .csv file: new Outlook, classic Outlook, Outlook on the web and Outlook.com; UTF-8. Read on 10 November 2026.
- Microsoft: Create or edit .csv files to import into Outlook: the column headings must match Outlook's default language. Read on 10 November 2026.
- Apple: Import, export, or print contacts on iCloud.com: Select All Contacts, Export vCard: one vCard with all of them. Read on 10 November 2026.
- Microsoft: Add a vCard to your contacts in Outlook for Mac: each contact in the vCard is saved; no bulk import of several vCard files or of .csv files. Read on 10 November 2026.