Skip to content
Blink Brief
Language:

Guide · Site visits and photos

HVAC service report: what to include, with photos and the customer's signature, as a PDF from your phone

By Blink Brief · Updated  · How pages are made

An HVAC service report records the customer and site, each unit's make, model and serial number, what you checked with its readings, the refrigerant type and amount you added, the work done and parts used, what you recommend, photos, and the customer's signature. Fill it in on your phone at the unit, and send the customer the PDF before you leave. The report maker on this page already holds a ten-item maintenance checklist.

What goes on an HVAC service report

No standard sets the layout, so the report is yours to design. A customer reads it to know what you did and what it will cost them next; the next technician reads it to know what you found. These parts cover both:

Part What to write
HeaderYour company, the technician, the date, and the time you arrived and left.
Customer and siteName, address and phone; the work order or agreement number, if there is one.
Reason for the visitThe complaint in the customer's words ("upstairs stays warm"), or "spring maintenance".
EquipmentFor each unit: type, make, model, serial number, refrigerant, and where it is (attic, closet, side yard).
Checks and readingsEach item you checked, its result, and the reading behind it.
RefrigerantThe type, the amount you added, and whether you found a leak and where.
Work done and partsWhat you did, and each part you fitted with its part number. Prices go on the invoice, unless the report is the invoice.
RecommendationsWhat should be fixed and how soon: now, before the season, or at the next visit. Note any the customer declined.
PhotosThe nameplate, each problem, and each fix.
Sign-offThe customer's name, signature and the date.

Equipment and readings: model, serial, pressures, temperatures, amps

Copy the equipment from its nameplate, not from memory. The warranty claim, the replacement quote and the next technician's parts order all start from the model and serial number.

A reading means more to the customer, and to you next year, when it sits next to the number it should be. Write "Capacitor 38 µF, rated 45 µF ±6%: replaced", not "capacitor weak". What a technician usually writes down:

  • On a cooling visit: the outdoor temperature; suction and liquid line pressures; superheat and subcooling, beside the manufacturer's target; return and supply air temperatures; compressor and condenser fan amps, beside the RLA and FLA on the nameplate; each capacitor's microfarads, beside the rating printed on it.
  • On a heating visit: gas pressure; the temperature rise, beside the range on the furnace's rating plate; the flame sensor's reading; and any carbon monoxide test you ran, with its result.
  • Airflow: the filter's size and condition, and static pressure if you measured it.

Refrigerant added

Record the refrigerant type and the amount you added on every visit, and whether you found the leak. On large systems it's also a federal rule. The EPA's Section 608 page says: "Technicians servicing appliances that contain 50 or more pounds of ozone-depleting refrigerant must provide the owner with an invoice that indicates the amount of refrigerant added to the appliance." Its leak repair requirements apply when an appliance with a full charge of 50 or more pounds leaks ozone-depleting refrigerant above the applicable trigger rate. HFC systems have a newer rule of their own: from January 1, 2026, EPA leak repair requirements apply to certain appliances with a charge of 15 pounds or more of an HFC or certain HFC substitutes (40 CFR part 84), but not to residential and light commercial air conditioning and heat pumps. For the refrigerants and system sizes you service, check the EPA's own pages.

Photos: the nameplate, the problem, the fix

  • The nameplate, straight on and readable. Wipe it first, and turn the flash off if it glares. One photo of each unit's plate saves copying errors in the model and serial.
  • The problem, close, then where it is. The swollen capacitor, the clogged filter, the rusted drain pan, the iced line: one close photo, and one wider photo that shows where it is in the unit.
  • The fix. The new part in place, the clean coil, the new filter with its size printed on the frame.
  • The meter, when a reading is why you repaired something. A photo of the gauge or meter screen backs up the number in your note.
  • Inside the home, only the equipment. Keep the customer's rooms and belongings out of the frame.

More on photos a client can use, and on sending the PDF, is in how to make an inspection report with photos on your phone.

Make the report here, item by item, and save it as a PDF

The list below starts with ten items for a cooling maintenance visit. Rename, remove or add items as you go; for a furnace, add the burners, flame sensor, ignitor, heat exchanger and flue. Every item starts as Needs attention, so mark each line once you check it: OK, Needs attention for something to watch or a repair you recommend, or Fail for something not working or unsafe. Put the reading in the note. Remove the lines you didn't check, so the report doesn't list them.

On an iPhone, start in the free Inspection Report tool instead: its Download PDF builds the file in the browser, while the print window this list uses may not give you one, and nothing you fill in here carries over to it.

HVAC service report: a photo, a status and a note per item

This report maker needs JavaScript. To make the same report without it:

  1. Copy these ten lines into a notes app, or into a table in Word: thermostat; air filter; evaporator coil; condenser coil; refrigerant pressures; electrical connections and capacitor; condensate drain; blower and belts; ductwork; nameplate (model and serial).
  2. At the unit, write OK, Needs attention or Fail and the reading on each line, and take a photo of the nameplate and of each problem.
  3. Put the photos next to their lines in Word and save a PDF for the customer (how to make a photo report in Word).

The printout has the title and your company at the top, then the customer and site, the date, the count of OK, Needs attention and Fail items and your work and recommendations, then one block per item with its photo, status and note. A line at the end says "Made with Blink Brief". We checked the printout in Chromium and WebKit, the engines of Chrome and Safari, on a computer: ten items with a photo each fill 4 pages of US Letter or A4. We haven't run it on a phone.

The customer's signature, and the copy they keep

The signature is the customer's acknowledgement, not a legal requirement for a service report in general: it records that they saw what you found, what you did, and what you recommended. It matters most when they decline a repair. Write the declined repair in the report and have them sign under it. Your company, a maintenance agreement or a property manager's work order may ask for a signature on every visit; follow it where it does.

The report maker above doesn't take a signature. The free Inspection Report tool does, with the same items, photos and statuses, plus your logo, and builds the PDF in the phone's browser with no sign-up:

  1. Under Report details, set Report title to "HVAC Service Report", and fill in Client, Site address and Inspector (you). Add logo takes your logo.
  2. Under Items you checked, add one item per component: its name in What did you check?, a photo, a Status and a Note with the reading. Its list starts with one blank item, so you type the items in.
  3. Under Summary, write the work done and your recommendations.
  4. Under Client signature, the customer types their name and signs in the box with a finger. The signature, their name and the date go at the end of the PDF.
  5. Choose US Letter or A4, tap Download PDF, and email or text it to the customer before you leave.

Your photos are never uploaded; the page loads its PDF library from cdnjs, and each page of the PDF has a "Made with Blink Brief" line. It doesn't keep the report, so download the PDF before you close the tab, and keep your own copy filed under the customer's address.

Our product · in development

Blink Inspection Report: the customer signs on your screen, and the PDF goes to their email address without you attaching anything. Set up your maintenance checklist once and every visit starts from it, and every technician on your team writes reports under your company name. Planned price $29 a month; reserving a place costs $29, the first month.

Join the early list

Maintenance agreements: the same checklist every visit

On a maintenance agreement, the report earns its keep when you compare visits: this spring's compressor amps against last spring's, a capacitor drifting toward the edge of its rating, the drain that clogs every August. That works only when every visit uses the same list, in the same order, with the readings on the same lines.

  • Two lists, if the agreement has two visits. A cooling list for spring and a heating list for fall, each the same at every address.
  • Last visit's report on your phone. Open it before you start, so you know what you recommended and what to measure again.
  • The next visit in the summary. The filter size, and what to check first next time.

The report maker on this page always starts with the ten items above, so a list of your own has to be retyped at each visit, and the Inspection Report tool starts with one blank item. Starting every visit from your own checklist is what Blink Inspection Report, in development, is for. Apps that already do some of this, with their prices and free tiers, are in inspection report apps compared; a report for a construction or facility site visit is in the site visit report template.

Questions

What should be included in an HVAC service report?

Your company, the technician and the date; the customer and the site; the reason for the visit; each unit's type, make, model, serial number and refrigerant; every item you checked with its result and reading; the refrigerant type and amount you added; the work done and the parts used; what you recommend and how soon; photos of the nameplate, each problem and each fix; and the customer's name, signature and date.

Does the customer have to sign the service report?

It isn't a legal requirement for a service report in general. The signature is the customer's acknowledgement that they saw the report, including any repair you recommended and they declined. Your company, a maintenance agreement or a property manager's work order may ask for it; follow it where it does. The free Inspection Report tool takes the signature with a finger on your phone and puts it in the PDF.

Can I make an HVAC service report on my phone?

Yes. The report maker on this page runs in your phone's browser, with no app and no sign-up: one item per component, each with a photo, OK, Needs attention or Fail, and a note for the reading. Your photos are never uploaded. It prints or saves a PDF through the print window. On an iPhone, or for your logo and the customer's signature in the PDF, use the free Inspection Report tool, whose Download PDF builds the file itself.

Sources