Skip to content
Blink Brief
Language:

Guide · Site visits and photos

Roof inspection report: what to include, the photos an adjuster expects, and a PDF from your phone

By Blink Brief · Updated  · How pages are made

A roof inspection report gives the property, the date, the weather and the roof type; then each component (the covering, flashing, valleys, vents and pipe boots, gutters, skylights, chimney, and the attic or decking where you saw it) with its condition, a photo and a note; then the repairs you recommend. For an insurance claim, add a close photo of each damage with something beside it for size, and a wide photo that shows where it is. The report maker on this page already holds the ten components.

What a roof inspection report contains

An owner reads it to decide what to fix; an adjuster reads it to see what the storm did. The same parts serve both:

Part What to write
HeaderYour company, the inspector, the date and time.
Property and ownerAddress, the owner's name and phone; the claim number, if there is one.
ConditionsThe weather on the day, and the date of the storm if the report is about one.
The roofType and material (asphalt shingles, tile, metal, a flat membrane), approximate age if the owner knows it, and the slopes named by direction ("south slope").
How you inspectedOn the roof, from a ladder, by drone, or from the ground; and what you couldn't reach or see.
Each componentIts condition, a photo, and a note (next section).
DamageWhat, where, and how big; storm damage kept apart from wear and old repairs.
RecommendationsRepair now, keep an eye on it, or replace, each with its reason.
Sign-offThe owner's name, signature and the date.

"How you inspected" protects you. A report made from the ground can't say the shingles on the back slope are sound, and it shouldn't read as if it does.

Component by component: covering, flashing, penetrations, gutters

The same components, in the same order, on every roof. Name the slope in each line when the roof has more than one ("North slope: flashing at the wall").

Component What to look for
Roof coveringShingles missing, lifted, creased or cracked, bare spots where the granules are gone, hail hits. Tiles cracked or slipped. Membrane blisters, splits, open seams, ponding water. Metal: loose fasteners, dents, rust.
FlashingAt walls, the chimney and skylights: lifted, loose or rusted metal; sealant cracked or missing.
ValleysWorn or cracked covering, debris, rusted valley metal.
Ridge and hipsCap shingles missing or cracked; a loose ridge vent.
Vents and pipe bootsCracked or split rubber boots; dented or rusted vents; missing fasteners.
SkylightsCracked glazing, the flashing around them, stains on the ceiling below.
ChimneyA cracked crown, loose or missing mortar, a missing cap, the flashing at its base.
Gutters and downspoutsLoose or sagging runs, clogs, dents; shingle granules collecting in them.
Fascia and soffitRot, water stains, gaps where animals get in.
Attic or deckingWhere you can see it: water stains, daylight through the boards, soft or sagging decking, damp insulation.

Photos for an insurance claim: wide, then close, with a scale

The Texas Department of Insurance tells homeowners after hail or wind: "Take pictures and video of the damage." No insurer's photo rules were read for this page, so ask the adjuster what they need. These photos are a sound start:

  • The house from each side, so "south slope" in the report means something to someone who hasn't been there.
  • Each slope, wide. From the ridge or the eave, showing the whole slope.
  • Each damage, close, with a scale. A tape measure or a coin beside the hit or the tear, so its size can be read from the photo.
  • The same damage from a step back, so the close photo can be placed on the slope.
  • Dents in gutters, downspouts and vents, and anything else the storm marked.
  • Wear and old repairs, labelled as such. The same department reminds homeowners that their "insurance company won't pay for a new roof just because it's old or worn out." A report that keeps storm damage apart from wear is one an adjuster can trust line by line.

If you cover a hole or tarp a slope to stop more damage, photograph it before and after, and give the owner the receipt. The department's advice to homeowners is to prevent more damage and "Save all receipts. Your policy may pay for temporary repairs."

The report maker below makes each photo smaller before it goes in the report, and the smaller copy doesn't keep the date and place the phone stored in the original. Keep the originals on your phone: they show when each photo was taken. To send every photo as one file as well, see how to combine photos into one PDF.

Make the report here and save it as a PDF

The list below starts with the ten components above. Each item holds one photo, so for a claim, add items: one per slope for the wide shot ("South slope: wide"), and one per damage for the close shot ("South slope: hail hit, 1 in"). Every item starts as Needs attention, so mark each line once you check it: OK, Needs attention for wear to watch or a repair you recommend, or Fail for damage that lets water in or needs replacing. Remove the lines you didn't see, so the report doesn't list them.

On an iPhone, start in the free Inspection Report tool instead: its Download PDF builds the file in the browser, while the print window this list uses may not give you one, and nothing you fill in here carries over to it.

Roof inspection report: a photo, a status and a note per component

This report maker needs JavaScript. To make the same report without it:

  1. Copy the components above into a notes app or a spreadsheet, one line each, and add the property, the date, the weather and the roof type at the top.
  2. On the roof, write OK, Needs attention or Fail and a note on each line, and take the wide and close photos.
  3. At a desk, put the photos next to their lines in Word or Excel and save a PDF for the owner (how to make a photo report in Word).

The printout has the title and your company at the top, then the owner and property, the date, the count of OK, Needs attention and Fail items and your notes on the roof, then one block per item with its photo, status and note. A line at the end says "Made with Blink Brief". We checked the printout in Chromium and WebKit, the engines of Chrome and Safari, on a computer: ten items with a photo each fill 4 pages of US Letter or A4. We haven't run it on a phone.

The owner's signature, and sending it to the adjuster

Go through the report with the owner before you leave, and have them sign that they received it. Keep that signature apart from any repair contract: on the report, the owner confirms they received it, not that they agree to work.

The report maker above doesn't take a signature. The free Inspection Report tool does, with the same items, photos and statuses, plus your logo, and builds the PDF in the phone's browser with no sign-up:

  1. Under Report details, set Report title to "Roof Inspection Report", and fill in Client (the owner), Site address and Inspector. Add logo takes your logo.
  2. Under Items you checked, add one item per component or damage, with a photo, a Status and a Note. Its list starts with one blank item, so you type the items in.
  3. Under Summary, write the roof type, the weather, how you inspected, and your recommendations.
  4. Under Client signature, the owner types their name and signs in the box with a finger. The signature, their name and the date go at the end of the PDF.
  5. Choose US Letter or A4, tap Download PDF, and email it to the owner.

Your photos are never uploaded; the page loads its PDF library from cdnjs, and each page of the PDF has a "Made with Blink Brief" line. It doesn't keep the report, so download the PDF before you close the tab.

The claim belongs to the owner. Send the report to the adjuster when the owner asks you to, or let the owner forward it, and ask the adjuster whether they want the PDF, the original photos, or both. The Texas Department of Insurance also tells homeowners to be there for the adjuster's visit, so the adjuster sees everything; if you can be there too, walk the slopes with your report in hand.

Many roofs a week: the same template, several estimators

After a storm, one estimator can see several roofs a day. A free report maker works one roof at a time, by one person, and three things start to cost time:

  • Your checklist. This page always starts with the ten components above; your own list, with your wording, has to be retyped on every roof, and the Inspection Report tool starts with one blank item.
  • Sending. Each PDF has to be saved, attached and emailed to the right owner by hand.
  • Several estimators. Each one types your company's name and details on their own phone, for every report.

Our product · in development

Blink Inspection Report: set up your roof checklist once and every new report starts from it. The owner signs on your screen, and the PDF goes to their email address without you attaching anything. Every estimator on your team writes reports under your company name. Planned price $29 a month; reserving a place costs $29, the first month.

Join the early list

Apps that already do some of this, with their prices and free tiers, are in inspection report apps compared.

Questions

What is included in a roof inspection report?

The property, owner and date; the weather, and the storm date if the report is about one; the roof's type, material and approximate age; how you inspected it (on the roof, from a ladder, by drone or from the ground) and what you couldn't see; then each component (covering, flashing, valleys, ridge and hips, vents and pipe boots, skylights, chimney, gutters, fascia and soffit, the attic or decking where seen) with its condition, a photo and a note; then the repairs you recommend; and the owner's signature.

How do you write a roof inspection report for insurance?

Describe what you saw, slope by slope, with a wide photo and a close photo of each damage, something beside it for size, the inspection date and the storm date. Keep storm damage apart from wear and old repairs: the Texas Department of Insurance reminds homeowners that their insurer won't pay for a new roof just because it's old or worn out. Ask the adjuster what they need before you send it; the report is evidence, and the insurer decides the claim.

Can I make a roof inspection report on my phone?

Yes. The report maker on this page runs in your phone's browser, with no app and no sign-up: one item per component, each with a photo, OK, Needs attention or Fail, and a note, printed or saved as a PDF. Your photos are never uploaded. On an iPhone, or for your logo and the owner's signature in the PDF, use the free Inspection Report tool, whose Download PDF builds the file itself.

Sources