Guide · Site visits and photos
Rental inspection checklist for property managers: routine inspections with photos
By Blink Brief · Updated · How pages are made
A routine inspection checks a rented unit's condition between move-in and move-out: leaks, smoke alarms, damage, pests, and whether what comes with the unit still works. Give the notice your state or territory requires (in Queensland, at least 7 days on a Form 9; in Washington, at least two days in writing), use the same checklist in every unit, and send the owner a report with one photo per item. The checklist below is already in the report maker on this page.
Short answer
- Before: written notice, as your rules require; book a time the rules allow.
- During: the same checklist, in the same order, in every unit; a photo of each item that needs work.
- After: the owner's report, with each item's photo, status and note.
This is general information, not legal advice. Check the current rules where the rental is.
Routine, move-in or move-out: what a routine inspection is for
The move-in and move-out inspections record the unit's condition at the start and the end of a tenancy, and they settle the deposit. They're covered in how to do a move-in or move-out inspection with photos, with the rules for California, Washington, British Columbia and Alberta.
A routine inspection happens during the tenancy. It finds a slow leak before it rots a floor, checks that safety items still work, and gives the owner a dated record of the unit between move-in and move-out. Queensland's Residential Tenancies Authority describes it this way: the manager or owner may "check for any water leaks, evidence of pests, damage or deterioration to the property", check that inclusions and fixtures are working, and look at maintenance coming up.
Because it's a check during someone's tenancy, keep it to the property's condition. The tenant's housekeeping and belongings aren't what the report is for.
The checklist, room by room
Use the same list, in the same order, in every unit, so this quarter's report reads against the last one. Add what your units have (a pool, a shared laundry) and remove what they don't.
| Area | What to check |
|---|---|
| Smoke alarms | Each one there and working: press its test button. |
| Kitchen | Under the sink (drips, swelling, mould), taps, the stove and oven that come with the unit, the range hood, cabinet doors and drawers. |
| Bathrooms | Under the sink, around the toilet base, shower and tub seals, the exhaust fan, signs of water on ceilings below. |
| Windows and doors | Locks and latches, screens, cracked glass, doors that stick or don't close. |
| Walls, ceilings, floors | Stains that point to a leak, holes, damage, worn or lifting floors. |
| Appliances | The ones the owner supplies: fridge, dishwasher, washer and dryer, if they come with the unit. |
| Heating, cooling, hot water | Working, filters that need changing, any leak at the water heater. |
| Pests | Droppings, nests, insects, damage to wood. |
| Outside | Gutters and downpipes, the yard, balcony or deck, fences and gates, the parking space. |
Notice and how often: where your rules are
How much notice you give, at what times, and how often you may inspect are set by the law where the rental is, and they differ a lot. Two examples, each from its own source, read on 5 November 2026:
| Place | Notice | When and how often |
|---|---|---|
| Queensland (Residential Tenancies Authority) | At least 7 days, on an Entry notice (Form 9). | A set time, or a 2-hour window ("between 9-11am"). No more than once every 3 months, unless the tenant agrees in writing. |
| Washington (RCW 59.18.150) | At least two days' written notice to inspect. The notice gives the exact date and time, or the earliest and latest times, and a phone number for the tenant's objections. | "Only at reasonable times." The section sets no number of inspections, but the landlord "shall not abuse the right of access or use it to harass the tenant". |
Elsewhere, look for the entry rule in your state's or territory's landlord and tenant law, or on its tenancy authority's site. Your lease may add terms of its own, such as how often you inspect. Keep a list of each unit's last inspection date, so the next notice goes out on time and never too early.
Photos: what to photograph, and the tenant's belongings
- Photograph the problem, framed tight. The stain, the drip, the cracked pane: close enough that the owner sees what you saw.
- One photo for each item that needs work. A photo of a working smoke alarm is useful too; a photo of every room isn't, on a routine visit.
- Keep the tenant's things out of the frame where you can. Check whether your rules let you photograph a tenant's belongings, tell the tenant in the notice that you'll take photos of the property's condition, and ask before you photograph a room full of their things.
- Same spot as last time. For something you're watching (a crack, a stain), stand where you stood last quarter, so the two photos can be compared.
More on clear, usable photos and sending the PDF is in how to make an inspection report with photos on your phone.
The report for the owner, made here
The list below starts with the checklist above, one line per area. Rename, remove or add items as you go. Every item starts as Needs attention, so mark each line once you check it: OK, Needs attention for maintenance, or Fail for something broken or unsafe, with a photo and a note. Remove the lines you didn't check, so the report doesn't list them.
Routine inspection report: a photo, a status and a note per item
Items
Every item starts as needing attention: mark each line OK once checked. Photos are read and made smaller in this page and never uploaded.
In the print window, choose US Letter and Portrait.
For a PDF: in Chrome, choose Save as PDF where you pick the printer; in Safari on a Mac, open the PDF menu and choose Save as PDF. Nothing is kept after you close the tab, so save the PDF first.
This report maker needs JavaScript. To make the same report without it:
- Copy the checklist above into a notes app or a spreadsheet, one line per area.
- On the walk, write OK, Needs attention or Fail and a note on each line, and take a photo of each item that needs work.
- At a desk, put the photos next to their lines in Word or Excel and save a PDF for the owner (how to make a photo report in Word).
The printout has the title and your company at the top, then the property, the date, the count of OK, Needs attention and Fail items and your summary, then one block per item with its photo, status and note. A line at the end says "Made with Blink Brief". We checked the printout in Chromium and WebKit, the engines of Chrome and Safari, on a computer; we haven't run it on a phone. On an iPhone, if the print window doesn't give you a file, the free Inspection Report tool's Download PDF makes the file itself.
The Inspection Report tool is also the one to use when the report needs your logo, or the tenant's signature on your phone: it has the same items, photos and statuses, an Add logo button, one Client signature box, and builds the PDF in the browser. Your photos are never uploaded; the page loads its PDF library from cdnjs, and each page of the PDF has a "Made with Blink Brief" line. Its checklist starts empty, so you type the items in.
Many units, several inspectors
A free report maker works for one unit at a time, by one person. With a portfolio, three things start to cost time:
- The checklist. This page always starts with the list above; your own list (the pool, the shared laundry) has to be retyped each time, and the Inspection Report tool starts empty.
- Sending. Each PDF has to be saved, attached and emailed to the right owner by hand.
- Several inspectors. Each one types your company's name and details on their own phone, for every report.
Our product · in development
Blink Inspection Report: set up your routine checklist once and every new report starts from it. The client signs on your screen, the PDF goes to your client's email address without you attaching anything, and every inspector on your team writes reports under your company name. Planned price $29 a month; reserving a place costs $29, the first month.
Join the early listApps that already do some of this, with their prices and free tiers, are in inspection report apps compared.
Questions
How do you conduct a rental inspection?
Give the tenant the written notice your state or territory requires, for the date and time it allows. On the day, walk the unit in the same order every time with the same checklist, take a photo of anything that needs work, write a note per item, and send the owner the report with the photos. Tell the tenant about anything they need to fix or report.
How much notice do I need to give for a rental inspection?
It depends on where the rental is. In Queensland, the Residential Tenancies Authority says at least 7 days, on an Entry notice (Form 9), and no more than one routine inspection every 3 months unless the tenant agrees in writing. In Washington, RCW 59.18.150 asks for at least two days' written notice to inspect, and entry only at reasonable times. Check your own state's or territory's rule before you send the notice.
What do property managers look for during an inspection?
Queensland's Residential Tenancies Authority lists water leaks, evidence of pests, damage or deterioration, whether inclusions and fixtures work, and maintenance coming up. Most checklists add smoke alarms, windows and locks, appliances that come with the unit, and the outside of the property.
Sources
- Residential Tenancies Authority (Queensland): Routine inspections: 7 days' notice on Form 9; no more than once every 3 months. Read on 5 November 2026.
- RCW 59.18.150 (Washington): Landlord's right of entry: at least two days' written notice. Read on 5 November 2026.
- Google Chrome Help: Print from Chrome (Android): Save as PDF in place of a printer. Read on 5 November 2026.
- Apple: Save a document as a PDF on Mac. Read on 5 November 2026.