Skip to content
Blink Brief
Language:

Guide · Site visits and photos

How to make a punch list with photos on your phone, and send it as a PDF

By Blink Brief · Updated  · How pages are made

Walk the job with the client, take one photo per item, and write where it is, what's wrong and who fixes it. Mark each item open or done. On a computer, a spreadsheet or a Word table holds that list. On site, the list on this page puts each photo, its status and its note into one printable report, which you save as a PDF and send, with nothing to install.

Short answer

  • Each item: where, what's wrong, which trade, one photo, open or done.
  • On your phone: the list below, then Print or save as PDF.
  • With your logo and the client's signature: the free Inspection Report tool.
  • At a desk: Excel or Word, one row per item.

What goes on a punch list item: location, problem, trade, photo, status

A punch list is the work still to be finished or fixed before a job is closed out. It's usually written on a walkthrough with the owner near the end, and everyone works from it until the last item is done. An item that reads well a week later, to someone who wasn't there, has five parts:

  • Location: room, wall or fixture, specific enough to walk straight to it. "Primary bath, vanity, left door", not "bathroom".
  • Problem, and what done looks like: "Door rubs the frame and won't stay shut. Should close without catching."
  • Trade: who fixes it (carpenter, painter, electrician, the tile sub), so each one gets only their items.
  • Photo: one per item, showing the problem.
  • Status: open or done, and the date it was closed.

Number the items, so a text from the painter can say "14 is done". The same five parts as columns:

# Location Problem Trade Status
1Kitchen, wall above the rangePaint missed around the outlet coverPainterOpen
2Primary bath, vanity, left doorRubs the frame, won't stay shutCarpenterOpen
3Hall, ceiling lightTrim ring missingElectricianDone Nov 4

Walk the job: one photo per item, wide then close

  • Walk in a fixed order. Room by room from the front door, and in each room ceiling, walls, then floor. The re-walk follows the same path, so nothing is skipped.
  • Write it as you both agree it. If the client points at something, write it down then and there, in their words if they're clear. Items added from memory after the walk are the ones people argue about.
  • Close enough to see the problem. A scratch on a countertop needs a close-up; something for scale (a tape measure, a coin) helps. When the spot is hard to find, take a wide photo first and add it as its own item, or describe the place in the location.
  • Mark the spot. A small piece of painter's tape on each item shows in the photo and tells the trade where to look.

Make the list here, with photos, and save it as a PDF

The list below runs in your phone's browser. Each item gets a photo, a status and a note. The statuses are the ones in the free Inspection Report tool: use Needs attention for an open item, OK once it's done, and Fail for a fix that didn't pass the re-check. Put the trade in the note.

Punch list: a photo, a status and a note for each item

This list needs JavaScript. To make the same list without it:

  1. Take one photo per item with the phone's camera, in the order you walk.
  2. In a notes app, write one numbered line per photo: location, problem, trade, open or done.
  3. At a desk, put the photos and lines in Excel or Word (next section) and save a PDF.

The printout has the title and your company at the top, then the job, the date, the count of OK, Needs attention and Fail items and your summary, then one block per item: its photo on the left, its number, name, status and note on the right. A line at the end says "Made with Blink Brief". We checked the printout in Chromium and WebKit, the engines of Chrome and Safari, on a computer; we haven't run it on a phone.

What this list doesn't do:

  • No logo and no signature. For those, use the free Inspection Report tool (the next sections say how).
  • One photo per item. For a wide shot and a close-up, add two items.
  • It doesn't save the list. It lives only in this tab: save the PDF before you close it. On an iPhone, if the print window doesn't give you a file, the Inspection Report tool's Download PDF makes the file itself.

In Excel or Word instead

A spreadsheet is the better home for a long list: sort it by the Trade column and send each sub only their rows. Use the columns from the table above, plus Photo and Date closed. Microsoft's steps to put a photo inside a cell, in Excel for Microsoft 365 and Excel 2024:

  1. Select the cell in the Photo column.
  2. On the Insert tab, select Illustrations › Pictures › Place in Cell.
  3. Choose This Device, pick the photo, and select Insert. Excel takes JPG, PNG, BMP, ICO, WEBP, TIF and GIF files (not animated GIFs).

A photo in a cell is only as big as the cell, so make the Photo column wide and the rows tall before you print. To send it, in Excel for Windows select File › Save As or Save a copy, choose PDF (*.pdf) in the Save as type list, and select Save.

In Word, a table with one photo per cell and the item's line under it keeps the photos in place. The steps, with Compress Pictures to make the file small enough to email, are in how to make a photo report in Word. We couldn't run Excel or Word for this guide, so these steps are Microsoft's, not ours.

Sign-off: the client's signature and the copy they keep

Have the client sign the list at the end of the walkthrough, to agree it's complete, and keep a copy each. That way an item that shows up later is a new request, not part of the list. Your contract may say how the punch list and final payment work; follow it where it does.

The free Inspection Report tool takes the signature on site. It has the same items, photos and statuses as the list above, plus your logo, and builds a PDF in the phone's browser, with no sign-up:

  1. Under Report details, set Report title to "Punch List", and fill in Client, Site address and Inspector (you).
  2. Under Items you checked, add one item per punch item: the location in What did you check?, a photo, a Status and a Note with the problem and the trade.
  3. Under Client signature, the client types their name and signs in the box with a finger. The signature, their name and the date go at the end of the PDF.
  4. Choose US Letter or A4, tap Download PDF, and email or text it to the client.

Your photos are never uploaded; the page loads its PDF library from cdnjs, and each page of the PDF has a "Made with Blink Brief" line. It has one signature box, so if you sign too, add yours afterwards. It doesn't keep the report: download the PDF before you close the tab.

Our product · in development

Blink Inspection Report: set up your punch list once and every job starts from it. The client signs on your screen, and the PDF goes to their email address without you attaching anything. Every super on your team writes reports under your company name. Planned price $29 a month; reserving a place costs $29, the first month.

Join the early list

Closing items: the after photo

  • Same spot, same framing. When an item is fixed, take the after photo from where you took the first one, so the two can sit side by side.
  • Keep the numbers. Neither the list here nor the Inspection Report tool keeps last week's list, so make the re-walk list with the same numbers in the names ("14. Primary bath, vanity, left door"), and mark each item OK, Needs attention or Fail.
  • Date it. Write the date fixed in the note, and send the client the new PDF with the first one.
  • Close the list. When the count reads 0 Needs attention and 0 Fail, that PDF, signed, is the record that the punch list is done.

More on clear inspection photos and sending the PDF is in how to make an inspection report with photos on your phone. To send loose photos as one file instead, see how to combine photos into one PDF.

Questions

What is a punch list in construction?

The list of work still to be finished or fixed before a job is closed out, usually written on a walkthrough with the owner near the end. Each item says where it is, what's wrong, who fixes it and whether it's done, and the list is walked again until every item is closed.

Is there a free punch list app?

You don't need to install one. The list on this page is free and runs in your phone's browser with no sign-up: a photo, a status and a note per item, printed or saved as a PDF. The free Inspection Report tool adds your logo and the client's signature. Apps with free tiers are compared in inspection report apps compared.

How do I make a punch list with photos?

Walk the job room by room. For each item, take one photo that shows the problem, then write where it is, what needs doing and which trade does it, and mark it open. On this page, each item gets its photo, a status (Needs attention for open, OK for done) and a note, and Print or save as PDF makes the report.

Sources